Free PPI calculator: turn a screen's native resolution and diagonal into pixels per inch, pixel pitch in millimetres and the panel's physical size.
Enter the panel's native pixel grid and its diagonal to read the pixel density. The calculation divides the diagonal in pixels, the hypotenuse of width and height, by the diagonal in inches: a 1920 × 1080 panel on a 24-inch screen comes out at 91.79 ppi.
Keep the resolution at the panel's native pixel count, not the logical size the operating system reports at 125 % or 150 % scaling. The diagonal is the screen size from the specification sheet. Results follow your typing, and the smaller cards give the pixel pitch, the total pixel count and the panel's physical width and height.
Use it to compare monitors or laptops before buying, to check whether a phone display is unusually dense, to understand why interface elements shrink on high-density screens, or to explain the difference between the ppi on a spec sheet and the dpi a print shop asks for.
Divide the diagonal in pixels by the diagonal in inches. The diagonal in pixels is the square root of width² + height²: for 1920 × 1080 that is 2,202.9 px, so a 24-inch screen has 2,202.9 ÷ 24 = 91.79 ppi. A 3840 × 2160 panel on 27 inches works out at 163.18 ppi.
No. PPI counts pixels per inch on a screen or in an image file, while DPI counts the ink dots a printer lays down per inch, and a printer may use several dots for one pixel. When a print shop asks for 300 DPI, it usually means 300 pixels per inch at the final print size.
Because the operating system shows a scaled logical resolution. At 150 % scaling a 3840 × 2160 panel reports 2560 × 1440, although the native grid still holds 8.29 million pixels. Entering the scaled figures on a 27-inch screen gives 108.79 ppi instead of the true 163.18 ppi.
About 300 ppi at the final print size is the usual photographic standard, so a 6 × 4 inch print needs roughly 1,800 × 1,200 pixels. This page reports screen density; for print, divide the image's pixel width and height by the print size in inches.
Only until you reach the limit of your eyes at your viewing distance. 20/20 vision resolves about one arcminute, which at 60 cm is a 0.17 mm pixel, roughly 145 ppi. At 30 cm the same limit is about 291 ppi, which is why phones carry far denser panels than desktop monitors.