Free frame rate calculator: turn a clip length into a frame count, the duration of one frame and SMPTE timecode at 24, 25, 29.97, 30, 50, 59.94 or 60 fps.
This frame rate calculator converts a clip length into the number of frames it holds, the duration of a single frame and the SMPTE timecode it ends on, for the standard production rates from 23.976 to 120 frames per second.
Frame rate is how many images a camera records or a player shows each second. Twenty-four frames per second is the cinema standard, 25 is the PAL and European broadcast rate, and 29.97 is the NTSC rate used in North America and Japan: the nominal 30 multiplied by 1000/1001 so that colour television stayed free of interference. Web, gaming and slow motion footage commonly runs at 60 or 120 frames per second, where a single frame lasts well under 17 milliseconds.
Pick the rate of your footage or timeline, then enter the clip length as hours, minutes and seconds. The frame count is the length multiplied by the rate, rounded to the nearest whole frame, so a clip that ends on a partly covered frame still counts it: one minute at 24 fps is 1440 frames, one minute at 29.97 fps is 1798 frames.
Timecode is the HH:MM:SS:FF label that names each frame, counted at the nominal rate, so 23.976 counts 24 per second, 29.97 counts 30 and 59.94 counts 60. Because 29.97 and 59.94 really run slightly slower than those nominal rates, counting every label would let timecode drift about 3.6 seconds per hour against the clock. Drop-frame timecode corrects that by skipping the labels 00 and 01 (four labels at 59.94) at the start of every minute except every tenth minute, and this calculator reports that second reading whenever you select one of those two rates.
Use the numbers to plan render time, storage, slow motion and timecode sync. If a timeline and its footage disagree by a couple of frames per minute, the drop-frame reading is usually the one that matches the wall clock, while non-drop keeps counting every frame of a 29.97 master in strict order.
Multiply the clip length in seconds by the frame rate. One minute holds 1440 frames at 24 fps, 1500 at 25 fps, 1798 at 29.97 fps, 1800 at 30 fps and 3600 at 60 fps. This calculator rounds to the nearest whole frame, so a clip that ends part way through a frame still counts that last frame.
Drop-frame timecode is used at 29.97 and 59.94 frames per second to keep timecode in step with the wall clock. Those rates are the nominal 30 and 60 multiplied by 1000/1001, so plain non-drop counting drifts about 3.6 seconds per hour. Drop-frame skips the frame numbers 00 and 01 (four at 59.94) at the start of every minute except every tenth minute: one hour of 29.97 material is 107892 frames, which drop-frame reads as 01:00:00;00 and non-drop as 00:59:56:12. Use it for broadcast delivery and stay consistent within one project.
One frame lasts 1000 divided by the frame rate, in milliseconds: 41.67 ms at 24 fps, 40 ms at 25 fps, 33.37 ms at 29.97 fps, 16.67 ms at 60 fps and 8.33 ms at 120 fps. That is the longest shutter time you can use without motion blur, and it also sets how much a high frame rate clip can be stretched when a 120 fps shot is played back on a 24 fps timeline.